|
| Brand Name: | JINCHENG |
| Model Number: | JC-WEBZ2573 |
| MOQ: | 200-500 Y |
| Price: | 0.45-0.5usd |
| Delivery Time: | 5-8 working days |
| Payment Terms: | T/T,Western Union |
Custom printed different styles rainbow tape zipper with sliver teeth by the yards
Fashion Long Chain Heavy Duty Tent Zippers 3# 5# 7# 8# 10# Colorful Printed Rainbow Nylon Zipper With Silver Teeth
Products Description:
Features:
Cut to desired length
Easy to sew and use
Ideal for purses, handbags, totes, backpacks, travel bags, and more
Rainbow nylon teeth
About the zippers we can Make zippers to any length.
This #5 Rainbow metallic nylon coil continuous zipper roll has the appearance of metal but the simplicity of nylon to sew and use. These zippers are ideal for handbags, totes, backpacks, travel bags, and much more. Available in various colors.
Please note: actual colors may vary from picture due to computer setting variances. Zipper pulls are sold separately.
We can custom the different types and pattern zipper as your wanted, just tell us your designs or show me the photos also ok, according to the photos we will make the sample for you check within 1-2days, after confirm the sample is ok, we can go on the orders or arrange productions,
HOW TO INSTALL A ZIPPER PULL ?
1) DETERMINE THE TYPE OF ZIPPER:
There are two types of zippers, either a coil type (nylon) or tooth type (metal or plastic).
2) DETERMINE THE TYPE OF SLIDER:
If you have a worn or broken slider, use the matching one from the kit. If the slider is missing, try different ones until one works.
TO REPLACE A SLIDER ON A SEPARATING ZIPPER:
First work the slider to the bottom of the zipper, then separate the zipper. The slider will always be on the box side of the zipper. Remove the stop on the top
of the slider side of the zipper and then remove the slider. Place the new slider on the zipper the same way the old one came off. Replace the stop and your
zipper repair is complete.
TO REPLACE A SLIDER ON A NON-SEPARATING ZIPPER:
Sliders on Non-Separating Zippers must be taken off and put on from the bottom of the zipper. If a zipper is stuck, pry it in half with a pair of nippers. For Non-Separating Zippers with bottom stops, remove the stop with needle-nose pliers.Make a cut with nippers, as small as possible, between the teeth or across the
coils on both sides of the zipper where the stop had been. This allows the old slider to be removed and the new one to be put on. If the stop is too difficult to reach, make the cut above the old stop. This, however, will shorten the zipper and require putting in an extra stop. On Non-Separating Zippers with no stop, the cut should be made 1/8˝ above the fabric where it meets the zipper. You may want to take out the stitches and re-stitch after replacing the slider.
After the old slider is removed, insert the new one by starting the teeth or coils evenly into the front or larger side of the slider. With the slider half on, push it with your index finger while holding on to each side of the zipper with your thumbs and middle fingers. Replace the stop or re-stitch to close and your zipper repair is complete.
Please note that our custom printed webbing is made to order, ensuring that each roll is tailored to your specific preferences.
Please remember to specify your desired design or provide your own artwork when placing your order. Let your imagination soar and create something truly extraordinary with our Custom Printed Webbing.
